The use of the abrasion layer greatly improves the abrasion resistance of the pipes during slurry and solidmedium conveying and thus prolongs the service life of the pipes.It is recognized that UHMW PE pipe has superabrasion resistance performance.Compared with the UHMW PE pipe,this series of products have the much moreexcellent abrasion resistance performance and reduce the mortar abrasion rate by more than ten times.Thus,this series of products can be widely used for conveying the solids,liquid-solid mixtures,gas powder and slurry etc., which may severely corrode the pipes and result in acid,alkaline and salt corrosion.
| 1. Elctric fusion connection. |
2. Crimping compession flange connection |
3. Spigot flange Connection |
| 4. Compression clamp connection |
5. Ttype Sealing Connection |
6. Double Seal Connection |
Strong deformation resistance
Better ability to resist foundation settlement. When the pipeline withstands pressure, there will be no pressure relief under certain bends.
High composite strength
Polyethylene and coated steel wire are composited with special modified materials, with a composite strength of ≥15N/mm.
Low overall cost
The pressure-bearing pipe mainly relies on steel wire, thereby reducing the consumption of polyethylene raw materials and having obvious cost advantages. It can be connected outside the ditch, reducing the amount of earthwork excavation, making the connection quick and reducing construction costs. The pipe is lightweight and has low dependence on large equipment.
Easy to transport and construct
Flexible pipes can be cut to different lengths as needed, and the number of joints is greatly reduced. The dead weight of the pipe is about 1/2 of the steel pipe and 1/3 of the cement pipe, which reduces the frequency of use of large-scale installation equipment.
Excellent hygienic performance
The pipeline material is anti-corrosive, not easy to breed bacteria, and will not produce the "yellow water" phenomenon of traditional pipelines.
Safe and reliable connection
Pipes generally use electrofusion and mechanical connections, which can adapt to the needs of various application environments.
1. basic material: high density polyethylene ; 2. Skeleton material: high density copper steel wire; 3.composite material: adhesive resin; 4. Supporting pipe fittings production workshops; 5.Quality control of steel wire coating supplier; 6. Customization ability; 7.Exquisition equipement.
| Nominal diamter /mm |
Nominal Pressure / Mpa |
| 0.8 |
1.0 |
1.25 |
1.6 |
2.0 |
2.5 |
3.0 |
3.5 |
4.0 |
5.0 |
6.3 |
7.0 |
8.0 |
9.0 |
10.0 |
11.0 |
12.0 |
13.0 |
14.0 |
15.0 |
| Nominal Wall Thickness / mm |
| 50 |
/ |
/ |
/ |
4.5 |
5.0 |
5.5 |
5.5 |
5.5 |
6.0 |
8.5 |
9.0 |
9.5 |
10.0 |
10.0 |
10.0 |
10.0 |
10.0 |
10.0 |
10.5 |
10.5 |
| 63 |
/ |
/ |
/ |
4.5 |
5.0 |
5.5 |
5.5 |
5.5 |
6.5 |
8.5 |
9.0 |
10.0 |
10.0 |
10.0 |
10.0 |
10.5 |
10.5 |
11.5 |
11.0 |
11.0 |
| 75 |
/ |
/ |
/ |
5.0 |
5.0 |
5.5. |
6.0 |
6.0 |
9.5 |
9.5 |
9.5 |
10.5 |
10.5 |
10.5 |
11.5 |
11.5 |
12.0 |
12.0 |
12.0 |
12.0 |
| 90 |
/ |
/ |
/ |
5.5 |
5.5 |
5.5 |
6.0 |
6.0 |
10.0 |
10.5 |
10.5 |
11.5 |
11.5 |
11.5 |
12.0 |
12.0 |
12.0 |
12.0 |
12.5 |
13.0 |
| 110 |
/ |
5.5 |
5.5 |
7.0 |
7.0 |
7.5 |
8.5 |
8.5 |
11.0 |
12.0 |
12.0 |
12.0 |
12.0 |
13.0 |
13.0 |
13.5 |
13.5 |
14.5 |
14.5 |
15.5 |
| 125 |
/ |
5.5 |
5.5 |
7.5 |
8.0 |
8.5 |
9.5 |
9.5 |
11.0 |
11.0 |
12.0 |
12.0 |
13.0 |
13.0 |
15.0 |
15.0 |
15.0 |
15.0 |
15.5 |
15.5 |
| 140 |
/ |
5.5 |
5.5 |
8.0 |
8.5 |
9.0 |
9.5 |
9.5 |
11.0 |
11.0 |
13.0 |
13.0 |
15.0 |
15.0 |
15.0 |
15.0 |
15.0 |
15.0 |
16.0 |
16.5 |
| 160 |
/ |
6.0 |
6.0 |
9.0 |
9.5 |
10.0 |
10.5 |
10.5 |
11.0 |
12.0 |
14.0 |
14.0 |
15.0 |
15.0 |
15.0 |
15.5 |
16.0 |
16.0 |
17.0 |
17.0 |
| 180 |
/ |
6.0 |
6.0 |
9.5 |
10.5 |
1.0 |
12.0 |
12.5 |
13.0 |
13.0 |
14.0 |
15.0 |
15.0 |
15.0 |
15.0 |
15.5 |
16.0 |
17.0 |
/ |
/ |
| 200 |
/ |
6.0 |
6.0 |
9.5 |
10.5 |
11.0 |
12.0 |
12.5 |
13.0 |
13.0 |
15.0 |
15.0 |
15.0 |
15.0 |
16.0 |
17.0 |
17.0 |
/ |
/ |
/ |
| 225 |
/ |
8.0 |
8.0 |
10.0 |
10.5 |
11.0 |
12.0 |
13.0 |
13.0 |
13.0 |
14.0 |
15.0 |
16.0 |
17.0 |
17.0 |
/ |
/ |
/ |
/ |
/ |
| 250 |
8.0 |
10.5 |
10.5 |
12.0 |
12.0 |
12.5 |
14.0 |
14.0 |
14.0 |
15.0 |
16.0 |
17.0 |
17.0 |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
| 280 |
9.5 |
11.0 |
11.0 |
13.0 |
13.0 |
15.0 |
15.0 |
17.0 |
17.0 |
18.0 |
18.0 |
19.0 |
20.0 |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
| 315 |
9.5 |
11.5 |
11.5 |
13.0 |
13.0 |
15.0 |
15.0 |
18.0 |
18.0 |
19.0 |
20.0 |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
| 355 |
10.0 |
12.0 |
12.0 |
14.0 |
14.0 |
17.0 |
17.0 |
19.0 |
19.0 |
20.0 |
21.0 |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
| 400 |
10.5 |
12.5 |
12.5 |
15.0 |
16.0 |
17.0 |
17.0 |
19.0 |
21.0 |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
| 450 |
11.5 |
13.5 |
13.5 |
16.0 |
18.0 |
18.0 |
19.0 |
20.0 |
21.0 |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
| 500 |
12.5 |
15.5 |
15.5 |
18.0 |
19.0 |
22.0 |
23.0 |
24.0 |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
| 560 |
17.0 |
20.0 |
20.0 |
22.0 |
22.0 |
24.0 |
26.0 |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
| 630 |
20.2 |
23.0 |
23.0 |
26.0 |
26.0 |
28.0 |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
| 710 |
23.0 |
26.0 |
28.0 |
30.0 |
32.0 |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
| 800 |
27.0 |
30.0 |
32.0 |
34.0 |
36.0 |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
| 900 |
29.0 |
33.5 |
35.0 |
38.0 |
40.0 |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
| 1000 |
34.0 |
37.0 |
40.0 |
45.0 |
47.0 |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
| 1200 |
38.0 |
40.0 |
43.0 |
50.0 |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
/ |
| Note: can be customized by customer's needs. |
| Automatic Feeding System |
Integrated Production Line |
Complete Mechanical Control |
| Comprehensive Test |
Xray Product Inspection |
One-code Track |
|
Shandong Donghong Pipe Industry Co., Ltd. (referred to as: Donghong Co., Ltd., stock code: 603856) is headquartered in Qufu, China, the hometown of Confucius.Is an engineering pipeline manufacturer, pipeline engineering service provider and pipeline engineering general contractor with the main business of four categories of functional and customized pipelines: special pipelines for rainwater and sewage diversion, special pipelines for municipal areas, special pipelines for industrial and mining areas, and special pipelines for national key engineering projects. The company has built up an industrial ecosystem with the participation of design institutes, financial institutions, port logistics, construction units, upstream and downstream enterprises, etc. The company is committed to becoming a global leading pipeline system comprehensive solution provider by making intelligent pipelines change human life and constant safety of pipeline transportation.
Donghong has more than 200 R&D personnel and more than 100 patents. Relying on national enterprise technology center, national CNAS laboratory, academician expert workstation, post-doctoral workstation and other national technology R&D platforms, Donghong deepens the research on digitalization, informatization and intelligentization of pipeline engineering and leads the development of engineering pipeline industry. Relying on national technology research and development platforms such as National Enterprise Technology Center, National CNAS Laboratory, Academician Expert Workstation, Post-doctoral Workstation, etc., Donghong deepens the research on the digitization, informatization and intelligence of pipeline engineering, leads the development of engineering pipeline industry, and serves the national key strategic projects and people's livelihood projects, such as South-to-North Water Diversion, Huangzhilin, Hanzhiwei, Beijing-New Zealand Expressway, One Belt, One Road, standardized farmland, urban and rural water supply integration, Liren gas, centralized heat supply, etc. The company has been engaged in national key strategic projects and people's livelihood projects.
1. Is your product meets the international standard ?
Our products have pass CE, BV, ISO and wars certificate, and all figures indicates higher than standard, you can feel free to let us know which national standard you required, we will check or test it for you.
2. What kind of service do you offer ?
As a manufacture fatory, we provide pipe products, pipe fittings, package and shipping; as a professional consulation company we provide project consulting advise, pipe system solutions and design suggestions; as an engineering focused enterprise , we also provide pipeline contractor service and pipe repair service, also can give free maintance guidance.
3. Do you support OEM/ODM service?
Yes, we offer customization in material, specification, logo, package , connection methods andothers. Meanwhile, our professional team can offer solution suggestion for your specified projects, we have successfull cases of that service.
4. What's your terms of payment?
T/T or L/C at sight.
5. How can you gurantee the goods you offered is qualified?
We warmly welcome all customers arrange the visit to our company and see our goods in sight, we can also provide strict test as per customer required before order. Meanwhile, before the bulk production, we can dispatch samples for customer to do their own tests to qualify the products.
){kind=link}